1.25G Spring-Latch SFP Transceiver (For 10~30km transmission)

1.Description
The SFP transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 10km to 30 km transmission distance with SMF.
The transceiver consists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a TIA.All modules satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal(LOS) output is provided to indicate the loss of an input optical signal of receiver.
The standard serial ID information compatible with SFP MSA describes the transceiver's capabilities,standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP MSA.
Compatible with IEEE 802.3z
Compatible with ANSI specifications for Fibre
Channel
Compatible with Telcordia GR-468-CORE
Compatible with FCC 47 CFR Part 15, Class B
Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
RoHS compliance (Optional)
2.Features
Dual data-rate of 1.25Gbps/1.0625Gbps
operation
1310nm FP laser and PIN photo detector
550m transmission with MMF
10km~30km transmission with SMF
Standard serial ID information compatible with
SFP MSA
SFP MSA package with duplex LC connector
With Spring-Latch for high density application
Very low EMI and excellent ESD protection
+3.3V single power supply
Operating case temperature:
Standard:0 to +70oC
Industrial: -40 to +85oC
3.Applications
Router/Server interface
Switch to Switch interface
Switched backplane applications
Other optical transmission systemsoC